Samsung J3 SM-J320H v. 5.1.1 Official Lolipop flash file / Firmware free download

Samsung J3 SM-J320H v. 5.1.1 Official Lolipop flash file / Firmware 

How To flash samsung j3 (2016)

Samsung Galaxy J3 2016 SM-J320H software problem, flashing a firmware is not without risks. If you don’t do it properly, you might render your phone inoperable. If you decide to proceed we won’t be liable to whatever might get wrong (neither we could provide technical support).

File Download

Password :  Without

how to flash / flash process

1. Boot your Samsung device into Download mode:
   1. Switch off your phone.
   2. Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
   3. Press Volume Up on the warning screen to accept it and boot into Download mode.
2. Once your device is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the phone and show an “Added!!” message.
3. Now extract the .zip firmware file you have downloaded to get the Odin flashable .tar file inside.
    Skip this step if you already have a .tar file of the firmware.
4. Click on the AP tab on Odin window and select the .tar.md5 FIRMWARE file that you downloaded.
    Note: DON’T play with any other options on the screen. You’re only required to connect your Samsung device and select the FIRMWARE file in PA tab.
5. Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
6. Your phone will automatically reboot when Odin is done flashing. You can then disconnect your device.